Алматы: Ул. Ауэзова, 14а, БЦ "Берекет", 8й этаж. тел.:+ 7 (727) 3493033; +7 771 702 7189. email: info@starsat.kz
30Янв2017

MOBOTIX Новый MxSwitch

MOBOTIX выпустил новый MxSwitch, который может использован для прямого подключения и питания до четырех MOBOTIX домофонов, камер или других устройств / + PoE PoE.

MOBOTIX’s new MxSwitch is a compact DIN rail module that can be used to directly connect and power up to four MOBOTIX Door Stations, cameras or other PoE/PoE+ devices. In addition to four PoE+ ports with a total maximum output of 75 watts and the uplink port with no PoE power supply, MxSwitch offers further technical features that make connecting and powering a complete MOBOTIX Door Station particularly easy. Thanks to the integrated MxSplit technology, four of the eight wires (or two of the four wire pairs) of the Ethernet connection cable of a Door Station can be used, for example:

as a two-wire connection cable for the electromagnetic anti-theft protection module in the outdoor station’s frame; and
as a two-wire connection cable for the MxBus – for example, to connect the MX-DoorMaster or an MX-GPS-Box directly to the MxSwitch.

  • as a two-wire connection cable for the electromagnetic anti-theft protection module in the outdoor station’s frame; and
  • as a two-wire connection cable for the MxBus – for example, to connect the MX-DoorMaster or an MX-GPS-Box directly to the MxSwitch.

mxswitch_scheme_20161219-jpg

Example: Two DoorStations, One M15, One MxDisplay+

PoE power supply of all devices on ports A to D. Door stations attached to ports A and D. M15 and MxDisplay attached to ports B and C (PoE only). Bridge 1 (B1) at MxSwitch connects push-button key for theft protection to wire pair 7/8 of the ports A and D. Bridge 2 (B2) at MxSwitch connects 12 V DC to wire pair 4/5 of the ports A and D. Connect wire pair 7/8 of the network installation cable to theft protection of door station frames. Connect wire pair 4/5 of the network installation cable to signal output of the BellRFID or KeypadRFID, respectively. Connect the signal outputs at the BellRFID and the KeypadRFID to the door opener of the corresponding door.

Required Accessory (not included): External power supply device 48 V DC (output current min. 2 A)

 

Источник:www.mobotix.com

 

  • 30 Янв, 2017
  • Arman Soltybaev
  • 0 Comments

Share This Story

Категории

Комментарии